Sanitary Ware – Important to Know for Genuine Buyers

Sanitary ware is something you should not overlook. Though it seems insignificant, it actually has to be used for over ten years and has to bear a lot of strain. It also plays an important role in forming a nice impression. A clean toilet and bathroom is what everyone wants after a tired day.

Wash closets, wash basins, bathroom fixtures and urinals are all a part of the washroom.

Centuries ago, a wash basin was a simple bowl of metal, placed on a table. A water-filled jug would be kept besides it. People had to manually pour water on their hands. After its use, it had to be emptied manually and the jug had to be refilled. Similar was the case with toilets, which was an open space with a water-jug in one hand.

Since those times, both of these has evolved and encompassed several new features. These features are all attractive and confusing. With a huge database of designs to chose from, we might make mistakes while selecting. There are a lot of determining, factors other than the style and comfort.

ceramic sanitary ware

So lets look on to certain points you should keep in mind while buying sanitary ware.

  • Space: Space is a very important aspect. According to interior designers, a closed room must have at least 1/3rd of its space free of any furniture in order to be aesthetically acceptable. So do not completely fill your bathroom with basins and toilets. Try occupying the least space possible. Sanitary ware is available in variable sizes. Select as size that suits both your needs and the space constrains.
  • Colour: Themed bathrooms are a top decor now. Different coloured toilets, basins, etc are available. You may also go for printed ones. In a nutshell, you need to keep the basic colour theme of your bathroom in mind. Aone house provides you a wide range of colors. You can check it out here.
  • Design: We have shifted from the conventional toilets and basins to stylish designs allotting more comfort and decor. In the aone house database, we encompass different designs that you may select from according to your personal likes, dislikes, comfort, bathroom theme, etc.
  • Flushing mechanism: Now this should be dependent on the available space, water constrains and budget. Dual flushing mechanism is always better as it tends to reduce the wastage of water but they are a little bit costlier. This is of use, if you are selecting toilet for office where a large number of people are going to use it.
  • Flushing capacity: All the toilets do not have the same ability to flush out. Some require more water and these do not form a good selection over a longer period of time. If it takes more than one flush to clear, it definitely is not a good pick.
  • Water tank: Water tank may be concealed inside the wall or may be attached to the wall. Select this on the basis of available space and budget.
  • Relation to the ground floor: Two types of water closets, S-trap or P-trap water closets are available at aone house. The S-trap water closet can be used for ground level houses as it is easy to connect with the ground. P-trap closets in turn can be easily connected with the walls and thus are used for upper floors in the building.
  • Ease of cleaning: Select basins and toilets that are easy to clean and easy to take care of. No matter, how gross it is, toilet has to be kept spick and span. It can become really dirty, by office use. Select designs that can be cleaned easily.
  • Automation: Semi-automatic and automatic bathroom accessories like tap, etc can be both useful as well as costly. Automatic taps tend to save water, but if the use is quite less, it actually may waste a lot of water. Similarly such toilets also tend to save more water. Automatic seat-covers on the toilets, look stylish and up your decor but punch a hole in your pocket! These are truly not a good pick for office use as the mechanism might be ruined and it wont serve its actual purpose.
  • Brand: Brand is very important when it comes to a product that has to be used for long. You do not want plumbers at your house every two or three months. Looking in to the long run, quality should not be compromised. Here at Aone house, we provide good quality sanitary ware at reasonable price. Be sure to check our products here.
  • Warranty: Yes, always look for this technicalities while buying a quality products. A brand should take responsibility and should be enthusiastic to solve any issues that may arise.

Ceramic Sanitary Wares – Quality Products Bring Complete Makeover to Your Home

Sanitary facilities are important part of our homes both aesthetically and functionally. Since the age of man, sanitation has been an important part of mankind and requires all care and attention. Sanitary wares, like any other product and installation require care and maintenance. In rental facilities, there is more rapid degradation of sanitary facilities that may arise from misuse and mis-handling of products. Replacement of sanitary wares requires careful consideration of the type of product, usage and installation process.

Bathroom Ideas on Sanitary Wares

Several factors influence your choice of bathroom style and sanitary wares to use on them. These may include your budget, style and theme of your house and even your personal preferences.

Types of Water Closets

There are various types and designs of water closets in industry. They may be largely classified according to the sitting position as;

  • European water closets, which are also called western style (WC or the EWC toilet) they are designed to take the sitting position while in usage.
  • Squatting pan ( designed to be used in the squatting position)

From this classification, further innovations have been made on these designs and these are;

WC Health: designed to combine the sitting comfort with the health benefits of the squatting pan hygiene considerations. The sitting height is from 22-25 cm from the ground.

EWC Toilet – this is the western water closet designed for sit in and comes with the seat and cover and the flushing tank attached to it. The height is from 50- 55 cm and must withstand up to 400 kgs without damage.

S & P Traps EWC Toilet Types

This is toilet design based on the position of the piping. The S trap is recommended for ground floor installations when piping is done from below ground level, while the p trap is best for piping done on the top floors where the pipe line cannot be done under the toilet. Further classification on these can be done such as;

  • Floor mounts toilets
  • Wall hung toilets

Classification of sanitary wares can also be based on the type of seat cover whereby we may have the hard close or the soft close seat covers.

They may also be designed with concealed or visible trap ways. Concealed trap ways are more classic in appearance and may attract a higher cost than the visible trap ways.

Indian Water Closets

Sanitary ware companies in India have endeavored to design and develop ceramic sanitary wares fitting all types of house designs and themes. Indian water closets have been well designed with different types of bends systems such as S,U, J. and P bends that are able to allow good water retention and there is complete elimination of any foul smell that may occur.

For the mega construction and housing developers, wholesale sanitary wares are offered by the sanitary ware companies in India and distributors, creating a one stop shop for all your requirements. Designing your house requires good analysis of the ceramic sanitary wares that will be required.

Sanitary Ware Manufacturers – Perfected the Art of Ceramic Production

There has been a steady and rapid growth in the sanitary wares market in the last 5-6 years. This trend has prompted manufacturers to enhance their production facilities to a point where the combined output of these products has more than doubled. Some of the major ceramic sanitary products manufacturers include;  

Aone House

Aone House is a world leader in ceramics and sanitary ware products. It is a high quality sanitary wares exporter based in Gujarat India. The company offers a wide range of products including pedestal wash basins European water closets, table top wash basins and much more. These products have been recognized for their elegance and perfection in the market.

Sanitary Ware Manufacturers

Hindustan Sanitary Ware Limited – Hindware

Hindustan Sanitary Ware Limited is a renowned company in the field of ceramics and sanitary wares. The company is the leader in manufacturing of ranges of ceramic sanitary wares including bathroom wellness products such as bathtubs, showers, high end water closets, tiles, bath fittings and many other related products. With over 50 years manufacturing experience, the company has maintained the lead in quality production and has received various awards in quality management, quality interior ceramic products and environmentally friendly manufacturing.

Cera Sanitary Ware Limited – Cera

Cera Sanitary Ware Limited is well established in India with a wide range of sanitary ware products such as faucets, tiles, wash basins, one piece and two piece toilets, kitchen sinks, squatting pans, waterless urinals, soap trays, plastic cisterns and wall hung basins. The company has also invested in technology and innovation to create a vast national and international market for these products.


Parryware Roca India – Parryware

Parryware Roca India prides itself in product design, technology and sustainable development. It has a total of seven manufacturing plants that are strategically located in India to maximize production and efficiency in the company operations. These are for manufacturing of vitreous china products, faucets and plastic bathroom accessories. Some of the flagship products include water closets, kitchen sinks, seat covers, electronic toilets, shower trays, shower cabins and many other products.


The company prides itself in a wide range of products in various categories. In the toilets category, the have the one piece toilet, close coupled, wall hung, wall faced toilets, seat covers and many more. The company has also developed innovative designs of wash basins including wall hung, wall faced and even the floor mounted ceramic wash lets that create a wonderful look to your house.

RAK Ceramics India: RAK

RAK Ceramics India is a globally recognized manufacturer of ceramic products including floor tiles, bathroom sanitary products and various types of lavatories. The products include wall hung and floor mounted designs, regular, bowl and counter ceramic wash basins, Urinals and urinal partitions, seat and covers (PVC single flush, faucets, and wash basins with pedestal)

Duravit Sanitary ware Pvt Ltd – Duravit

Duravit Sanitary ware is another well-established company in sanitary ware manufacturing. The company is distinguished for superior design and functional ceramic ware products. The company has continuously engaged in innovation and drive towards new production technologies and product design. You can get excellent bathroom designs, wash basins and wash areas, shower trays, bath tubs and a complete range of bathroom well ness products.

Other innovative product manufacturers include Tessa Sanitary ware (Eros), Bell ceramic collections, Axor and Jaguar PVT Companies, all of which deliver excellent and long lasting ceramic sanitary ware products.

Internal Industry Factors Affecting Development and Expansion of Sanitary Wares Market

History has shown that the human race cannot do without comfort, and luxury living, and sanitary wares have been important materials that deliver luxurious living.

Current Research and Development in Ceramics

The various developments in ceramics have also brought about changes in the manufacturing processes of ceramics. Ceramics are inorganic non-metallic solids that can function in a broad range of applications. The current research and development goes beyond various fields such as engineering, electronics as well as aerospace.

manufacturers of ceramic sanitary ware

Analyzing the Strengths and Weaknesses of the Global Ceramic Industry

The strengths and weaknesses of the global ceramic industry can be analyzed in various ways. For instance some governments from various countries have commitments to ensure high level of competition within their economic sectors that stimulate market expansion. This has made businesses become globally competitive and recognized due greater visibility and penetration into various continents.

The strengths and weaknesses of the global ceramic industry analysis the regulations, that enable the ceramic industry to develop quickly. So far, there are many factors that affect business operations in the ceramic industry. Such factors include economic factors, financial factors as well as climatic factors. The ceramic sanitary ware normally consists of wash basins, urinals, cisterns and bidets. The ceramic wares have the ability of maintaining hygiene and are strong in nature.

Global Expansion Opportunities for Sanitary Wares

This industry has had a high expected demand over the years in various countries. The ceramic wares industry is segmented in raw materials such as ball clay and quartz. This segmentation has enabled global competition and expansion opportunities across all borders.

In recent years, ceramic sanitary ware has been used in construction of offices and in public transportation and also in investments. The ceramic sanitary ware industry is very competitive and it has several international and regional providers. Some of the key vendors in the ceramic sanitary wares have made impact in all corners of the world and not exhausted the market potential yet. The products are important for our daily lives. These wares are able to enhance the looks and value of the place where they are put.

Factors Affecting Global Competition among Manufacturers

Sanitary wares are of different designs, colors and styles. Since the wares are of delicate nature, it is important that they are handled with care. One should also ensure that the wares are well certificated upon purchase so as to avoid buying products that are not genuine. Genuine ceramic ware products do not consist of cracks or inconsistent surfaces. Quality, affordability and durability have been major areas driving competition.

These products require proper handling especially when installing them and handling them. In most countries there has been a vast growth of the ceramic sanitary ware products. The reasons for the increase in these products are the rapid demand especially from the building and construction sector. For most people the ceramic sanitary ware give a luxurious feel and especially to the homes. Having such products within ones home portrays wealth and an improved standard of living.

The manufacturers of ceramic sanitary wares have also been able to renovate their designs and styles so as to suit the preferences of most people. The current designs include water storage sets, wash basins, bath tubs and more. The ceramic ware business is in the boom for many people in most countries.

Sanitary Wares and Interior Design Process

The process of interior design follows a systematic and coordinated process that involves research, analysis, and the integration of knowledge into the creative process to produce an interior theme that achieves the target goals and objectives. The choice and installation of different types of sanitary ware in the house can completely alter the theme and introduce a fresh appearance of the house.

Concept Design and Planning Considerations

This process involves a detailed, measured and photographic survey of the existing and proposed drawing to fit the ceramics at designated places. With the advanced technology today, 3D modeling has enabled interior design artists to develop models and illustrate to potential clients before actual installation is done.

Matching the Home Finish with the Design of Sanitary Wares

 The sanitary wares are important part of our daily lives and are part and parcel of the home. When they are selected well they can effectively enhance the look and value of the home as well as adding to the comfort. These wares come in different designs, colors and styles and they add to the luxury of the home.

Sourcing and Transport Considerations of Ceramic Wares

Sanitary and ceramic wares are delicate installations that require proper handling during installation. It is important to ensure factory certification before purchase. The appearance of the product should be smooth and beautiful, absent of cracks, smooth edges, and with a consistent tone.

Due to the brittle and delicate nature of these wares, extreme caution must be exercised in handling. Proper wrapping of the ceramic wash basins, water closets and ceramic sinks helps in retaining the smooth edges and the beauty of the product.

ceramic sanitary wares

Ceramic Installation Procedures

Installation is done only after completion of the plumbing, drainage, floor, tiles and room doors. The water closet is fixed with proper alignment with the inlet and the outlet piping system. This is important as it prevents future problems of leakages and avoidable breakages. Where necessary, holes are fixed onto the floor or wall for proper fixing of the screws that will eventually mount the ceramic wash basin.

It is important that the W.C connector rubber seal is correctly located on the rim of the connector. In attachments of wash basins it is crucial to incorporate the water proof seals, to ensure no leakages will ever happen.

The Bath Tub and Shower Tray

The tub /tray drain shall be well connected to the waste pipe using the appropriate waterproof adapter. The joints around the tub must also be sealed with a waterproof sealant. For the shower accessories, the cold and hot water points must be appropriately marked, fixed and then tiling done.

Kitchen Sinks and Washes Basins

They must be installed to the exact position a specified in the drawings to avoid any misalignments from occurring. The waste pipes shall also be well fixed to avoid potential leakage problems. The gap between the sink and marble must be well sealed to avoid problems of dirty water clogging the lines in due course.

Importance of Certification and Standard Maintenance for Wall Mounted Commode & Sanitary Ware Products

Sanitary ware manufacturer have seen a vast growth and there is a high demand for ceramic sanitary ware products. There are various reasons for these increased demands of ceramic sanitary ware though. Ceramic sanitary ware provides a luxurious feel and there by gives an upscale feel to the interiors of the home. It is one of the ways by which wealth and standard of living can be showcased without actually having to brag about it verbally.

New-Age Designs

The manufacturer of sanitary ware are gradually renovating their styles of the product with that suit the current lifestyles of people. The new-age designs include wall mounting commodes, water saving sets of wash basins and faucets. Renovated steam bath structures as well as bathing structures have found its place in the modern bathrooms. The various shapes of bathtub also add to the aristocratic feel of the setup of the house. The manufactures are currently in the boom since there is a high demand of new designed sanitary products in the market instead of having to replace the old ones.

Wall Mounted Commode India

Demand of the Products

The current family structure setup, in most cases the husband and wife both earn and hence the standard of living is usually high. The fast paced lifestyle of the people has led to the demand of better developed sanitary ware products that make daily life chores less time consuming. The families presently opt for a more premium look and hence willingly invest in high end products. The foreign companies in the market are the ones to offer the premium look wares. The foreign sanitary ware products are more in demand due its superior quality and proper completion of certification requirement.

Certification of the Product

Certification of a product is the identification of the quality of the product from a recognized source. This certification is very important since you being the customer must ensure that you are providing value for money when you are buying things for your home. The certification standards and requirement of any product, including sanitary ware will depend on the country of its origin. Indian certification standard means an ISO9000 certification mark on the product. This certification is the indication that the product is of good quality and has been made conforming to the laws of environment. For the European market, it is important to follow the European standard which UNI EN. Similarly the American certification requires the fulfillment of ASME/ CSA standards.

Standard of Certification

The requirement of the certification is to ensure the obedience to the criterions and the essential requirement of the import-export business. There are certain tests that the product has to undergo in order to get the certification. Some of the most commonly performed tests are dealing with the physical and chemical resistance of the mass ceramic, the basic functionality of the sanitary ware combined with their geometric as well as dimensional aspects for that of the product. It is only after the completion of these tests that the products are certified and procure eligibility to be sold in the market and for trade.

Ceramics Sanitary Wares Market in Different Countries

Research currently predicts a global increase in the demand for sanitary ware products by over 7% by the year 2020. The growth in sanitary wares market is largely boosted by rapid expansion in the housing industry. Rapid increase in construction projects across the world has consequently led to a rise in the requirements for ceramic sanitary wares. In the United States, rapid increase in private housing units is further driving up the sales. Renovations of buildings and housing units, and interior design considerations have played a key role in enhancing the demand of ceramic sanitary wares.


Sanitary Ware Market in India

According to research, the sanitary conditions have improved in India. Better economic environment has led to increased per capita disposable income and improved living standards. The government’s effort in educating people about safe sanitation has also enhanced the demand for sanitary ware products. Currently, the demand for these products is highest in the residential sector but public utilities like malls, hotels and hospitals have also contributed to demand.

According to a forecast up to 2018, the water closets are the major revenue contributors, with wash basins and cisterns following. The significant rise in middle class and urbanization has created demand for other products such as pedestals and bidets.

Ceramic Sanitary Wares

Sanitary Ware Market in Bangladesh

Similar to many other countries, the ceramic industry in Bangladesh has been heavily promoted by the construction industry. Bangladesh ceramic market is approximately 17% of the international ceramic market. The Asian region including china and India dominate the global market for ceramics. Heavy commercialization of emerging sanitary industries has made the sector very attractive. With the rapid growth in this economy, local production is likely to be supported by imports from neighboring countries such as India and China.

Demand in Thailand, Vietnam and Cambodia

Research has shown that as late as the year 2015, this market has imported over 10 billion worth of sanitary wares. Domestic manufacturing is never able to fulfill the countries demand thus the huge imports from countries such as India.

In neighboring countries such as Vietnam and Cambodia, domestic production is still very low therefore providing great marketing opportunities from India. Trade agreements have also made business among Asian nations to be friendly. Tariff concessions between these countries have allowed very low taxation rates thus a great booster to trade. There has also been rapid increase in demand in the Turkish market.

Demand in the Middle East

This region has very high demand for ceramic wares. In Saudi Arabia, demand is supported by domestic production as well as imports from countries such as India, china and Spain. Domestic production supplies over 45 % of the demand while imports cater for the remaining 55%. From the year 2014, there has been a rapid increase in demand for these products especially from the hotel sector. The gradual recovery in the construction sector is also boosting demand especially with governments of Bahrain and Saudi Arabia investing in construction of affordable housing.


The demand for ceramic sanitary wares continues to grow, largely due to positive economic outlook in various economies. Asian countries have benefitted immensely from ceramic trade between neighbors due to trade and tariff concessions. Indian ceramic sanitary ware manufacturers stand to gain from domestic as well as regional trade.

Life without Sanitary Wares

Sanitary wares are one of the most important elements of any household. However, sometimes the homeowners pay the least attention to them. But have you ever imagined your life without sanitary wares? The answer is probably NO because you never think like this before. Sanitary wares are so deeply related to your daily life, that they become a part of your life before you even realize that fact. Unfortunately, there are lots of areas where these items are not easily available. People of these areas do not know about the use of these items in their bathrooms. They do not have a proper bathroom or toilet where they can install the sanitary wares. Their lives without proper sanitary wares are always facing a threat of hygiene related issues.

ceramic sanitary ware

Problems of Rural Areas

There are various remote areas in many countries where you cannot see the use of sanitary wares in their daily life. Till now they use the primitive processes when it comes to sanitation. They do not even maintain the minimum hygienic methods in their toilets and bathrooms. In some areas, people do not have toilets and bathrooms. They go to the open field or choose the river banks for defecation. They do not use a proper toilet and choose the method of open defecation. In such areas, the use of sanitary wares seems like a dream.

Threat of Illness

When people practice open defecation on fields, bushes, beside railway tracks, open water bodies and other areas then it leads to various illnesses. This practice is highly dangerous for the health of the local people. The foods and other items become infected easily because of that practice. Flies and other insects can spread ailments in an easy way because of that practice. Thus, life without proper sanitary wares can become very dangerous. You can get several severe health issues just because you do not use the right sanitary wares.

Proper Knowledge Is Required

Installing the right sanitary wares is not a luxury matter; rather it is one of the basic needs of every household. The earlier you can realize this fact the better lifestyle you can have. You can save your children and other family members from getting affected by those fatal ailments that can cause by the practice of open defecation if you have a proper toilet and sanitary wares in your house. To get them you need to have the right knowledge about the matters like sanitation, sanitary wares, their proper use and installment process.

Choosing the Right Items

It is also required that you choose the right items according to your lifestyle when you opt for the sanitary wares. Some are good for the modern houses of the advanced cities, and some are perfect for the rural areas. You need to talk to the experts of this industry to get the right item for your bathroom. You can take the help of the internet to know how many types of sanitary wares are there are which one will be most suitable for your home. You can get rid of the life without sanitary wares and enjoy a more hygienic as well as safe life.

Technologies Incorporated In Ceramics for Developing Modern Sanitary Ware

Globalization has brought about great changes in the world. There are lots of new and advanced techniques introduced in the market that are opening up new opportunities for both existing players in the market as well as paving ways for new ones.

Recent years have observed great activity in the industry sector of white wares that have in turn, boosted the growth of consumer demands in porcelains. Research in science has led to innovation of new technologies that have eliminated the manufacturing defects and accelerated the growth in manufacturing processes. The changes are so vivid here, that manufacturers and developers are now thinking that in many cases only some changes are adequate to bring in perfection in such products.

The few changes are listed below:

  • Raw materials that are now commercially available are now very well prepared and the manufacturers have to now mix it. Also, raw material suppliers are now providing with readymade bodies. This is a time saving procedure for the developers, in the entire porcelains process. Here granulate production, which is one of the expensive procedures can be now left to suppliers.
  • Many new technologies are on their way that is more energy efficient ways of production of granulate. Also, carefully directed grinding is offering accurate size of grains that is proving to be useful in glazes grinding.
  • The decoration and glazing of hygienic wares like tiles uses systems that are completely automated by robots. These works according to several instructions given through computer coding attached to ceramics.

modern sanitary ware

State-Of-The-Art Technology Used For Sanitary Ware

Highly modernized production line is introduced in the arena of sterile ware that is offering various functions ranging from pressure casting to set up of kiln. Thus, operators are left with only supervisory functions. Some of the prime prerequisites in clean ware sector of industry are bar code that is applied on ceramic, pressure casting department for both battery and single casting along with software process and control.

There is also the same tradition that is followed by sanitary ware production, which involves fine grounding of raw materials into a slurry solution.

The process of pressure casting is made easy and only takes a few minutes. The end product has much less seam as most of the water is removed making it harder.  Once, every ware is dried in an automatic system, it is directly passed to robot spray lines where automatic interiors glazing machine is installed.

Science has developed to a large extent here as the machine reliably covers even the hard-to-reach areas. After this process, these white wares are transported to storage units.

Automation in Production Stage

Many companies have also successfully automated downstream fabrication stage where the final sorting and packing of white ware is done by machines. This, on the other hand, has increased productivity of toilet ware dramatically. Thus, it can be said that the global industry of sterile ware is experiencing great change by implementing and coming closer to the next generation processes of creation and distribution. It is providing with automation of entire course with enhanced productivity.

Features and types of Sanitary Ware Installed in Steam Showers and Sauna


There is nothing as relaxing and comforting as a nice bathe after a long days work. Though steam showers and saunas have been confined to luxury hotels and health spa; modern homes are increasing using installing smaller versions of these systems in order to bring luxury and comfort during bathing. To achieve this type of luxuriate indulgence, one needs to use the right ceramic wear which not only provides the required functionality but also has an appealing and aesthetic look.

Steam showers and saunas

Steam showers use state of the art bathroom ceramic and glass bathroom fixtures to bring comfort and relaxation. The user comfortably seats on a bench while being pelted with a soothing cloud of moisture at 110 – 118 degrees fahreinheight and a humidity of 100%. Saunas are designed to provide wet/ heat session to a group of people and heating may be from dry air or steam.

showers and sauna

The user not only enjoys the bombardment with warm vapor but also emerges felling relaxed and rejuvenated. In addition these facilities are recommended by dermatologists since they greatly improve the skin and nervous receptors on the skin. After this refreshing experience one needs a final washing.

Accessories and parts

To enjoys this little piece of heaven on earth, one need the right ceramic sanitary ware. First, one must install the system together with accessories such as cold water supply tank , vapor generator, thermostatic controls, hoses and other fitting, handles, valves , shower glass seals and rails to hang bathing clothes and towels.

Features of these units

These parts are designed from highly durably and aesthetic materials that give the user and experience of comfort and executive service.

ceramic ware

A combination system allows the user to bathe and therefore has additional parts such as shower valves, water closet, soap dispensing unit and a dressing wall. These are designed to bring out luxury and comfort. These parts are made from shinny material with a supreme metallic luster which gives a high class feel.

At the hearts of this marvelous shower is the steam generator. This is filled with water which is then boiled to form vapor. The unit is made from high quality corrosion free materials. In addition, it is fitted with thermo sensors and thermostatic valve to ensure that it does not heat beyond required temperature.

These systems also have a fragrance dispenser that aerates the washing space and gives different scents depending in user preferences. They are also fitted with plumbing pipes made of stainless steel or chrome platted finish to withstand corrosion which is increased by hot water. The chrome finish also improves the aesthetic appeal.

The units have an integral comfortable seat made from high quality wood. These units are also installed with soap dispensers and a well decorated mirror panel where one can admire himself/ herself as the bathing progresses. These units also come with a hot shower unit with 4-6-8 jet nozzles that sprinkle the water and enhance the bathing after a relaxing bath.