Technical Specification

NAME OF TEST	As per 2556 (part I) 1994	Our TEST VALUES
1. Crazing test	No carazing up to 2 Cycle up to 5 hrs. Each Cycle up to 10 hrs. at pressure 0.34 to 0.37 Mps.	No Problem Up to 4 Cycle and No Crazing
2. Water absorption	Average Value should not exceed more than 0.5%	Max. 0.30% Show better Vitrification
3. Modules of Repture	Not less than 60 Mps.	Min. 70 Mps. / Min. 80 Mps.
4. Chemical Resistance	No less than of the glaze when compared with control sample	No loss of effectively of the glaze when compared with control sample.
5. Resistance to straining and Burning	No stain shall remain on either of test piece	No stain shall remain on either of test piece
6. Wavy Finish	None on all visible surface	None on all visible surface
7. Discoloration	None on all visible surface	None on all visible surface